How to use the BOSS headphones
01
Slide the headband through the headpadding
Slide the metal headband through the headpadding, until the headpadding is positioned in the middle of the headband.
02
Attach the earpaddings to the sound boxes
This might need some force, but afterwards both modules align perfectly. The arrows on the soundbox provide guidance in which direction to use.
03
Mount the sound boxes on the headband using the screw knobs
Make sure the sound box is in the upright position, with the remote control buttons facing down.
04
Connect the cables from the headband to the sound boxes
They are connected properly when you hear them click. (Don't be too careful. it might take a bit of force to connect them well).
Volume +
Single touch : Volume up
Press 2 sec : Skip song
ANSWER Button
Single touch : Play/Pause song & Answer/End call
Volume -
Single touch : Volume down
Press 2 sec : Previous song
Bluetooth button
Press 2 sec : Turn on BOSS
Press 5 sec : Turn on BOSS - pairing mode
Press 3 sec : Turn off
What's in the box
2 ear cushions
2 sound boxes
1 head cushion
1 headband
2 knobs
1 3.5mm mini-jack
1 USB-C cable
getting started
Turn the headphones on by pressing the Bluetooth button for 3 seconds. Your headphones will automatically connect to the device i was paired to previously. Turn the BOSS off by pressing the Bluetooth button for 3 seconds again.
Press and hold the Bluetooth button for 5 seconds. The headphones will tell you it's pairing. The headphones will be named 'RP Boss'. Once successful, you'll hear a 'dong', confirming the connection.
